Requirements for X-Ray Equipment Owners & Installers

Every OWNER of a radiation machine MUST comply with their State Radiation Control Agency regulatory and registration requirements for each radiation machine possessed on site. The only exception are OWNERS of cabinet x-ray machines installed in New York (see Exemption 11).

OWNERS should be aware that every manufacturer or the distributor who sold you the radiation machine MUST report by law, EVERY sale and installation to the applicable State Radiation Control Agency within the State designated reporting time frame which varies from 10 days to 90 days in some States.

It is the OWNERS responsibility to register ALL radiation emitting equipment in every State. There are 22 States who require the OWNER to register their x-ray equipment PRIOR TO OPERATION. The remaining States require registration typically within 30 days after installation.

In addition, below is a list of 35 States which also currently require the manufacturer and/or distributor who intends to sell, lease, lend, transfer, dispose of, install, assemble or repair radiation machines, MUST register with each of the below State Radiation Control Agencies the manufacturer and/or distributor intend to provide these services. This State required registration is often referred to as Vendor / Assembler Registration as described in the States registration regulations.

RCE Consulting, LLC maintains a current inventory of all blank State Vendor/Assembler application forms upon request.

Regulations state – Any manufacturer, distributor or installer who intentionally and knowingly violates this registration requirement may be subject to enforcement action in accordance with the applicable State regulations regarding Deliberate Misconduct.

The OWNER is responsible to verify (obtain proof of registration) that the manufacturer, distributor, and/or installer is registered with the applicable State Radiation Control Agency to provide these services. State regulations require the owner to refuse service if proof of registration cannot be provided:

 If you have questions, send an email to contact@rcexraytraining.com or call the Office: 843-650-9724 or Mobile: 865-696-9117 and you will be contacted within 24 hours.